Cannabis rosin is relatively new to the scene. Extracting rosin from your cannabis flower is a great way to get a solvent free highly concentrated with THC sap. People have taken a shine to this technique as you are keeping the product pure and chemical free.
The two elements needed to extract the sap is heat and pressure, so it is something really easy to do at home if you’ve got the right equipment.
We are going to be looking at 5 of the best rosin presses for cannabis that are under $500, comparing their features, pros and cons to finally judge which is the best.
Comparison Chart
| Product | Name | Features | Latest Price |
|---|---|---|---|
FIRST CHOICE   |
1. The Dulytek DM800 Personal Heat Press |
|
Check Price |
RUNNER UP   |
2. The YaeTek Heat Press |
|
Check Price |
BUDGET CHOICE   |
3. The Dab Press Rosin Press |
|
Check Price |
  |
4. The 10 Ton Hydraulic Cylinder Heat Press |
|
Check Price |
  |
5. The Dulytek Retrofit Heat Plate Press |
|
Check Price |
Our Best Rosin Press Under $500: Complete Reviews With Comparison
1. The Dulytek DM800 Personal Heat Press
This press is small, compact and portable so it won’t take up loads of room in your home.
Features
- Press force of up to 1000 lbs
- The temperature scale is in fahrenheit and celsius
- Has 2 x 3 inch dual heating pads
- It has a press timer
- The Dulytek DM800 weighs less than 10 lbs
- Maximum temperature is 482 degrees fahrenheit
- Comes with a free starter kit
The Good
Really easy to use and not complicated at all to set up. You can choose the pressure you want to use depending on the amount you are pressing.
Gets a great yield of rosin even from a small amount of weed and comes with a free dab kit so even beginners can get into the flow quickly.
The Bad
It can be a little bit stiff and awkward to press and also a little bit temperamental with certain features playing up now and then.
It only presses a maximum of 3 grams of weed at a time which can make the process rather long.The heat pads don’t touch all the way around when fully pressed either.
PROS
CONS
2. The YaeTek Heat Press
The Yae Tek heat press is a hand cranked press that can reach the temperatures of 255 degrees celsius.
Features
- Voltage of 110v
- Has a built in timer ranging from 0-999 seconds
- 1000w power
- Use the hand crank to press
- Control over the pressure, temperature and time
The Good
Makes a high quality end product, easy to use as it has Individual controls for the temperature and timer. You can set it up in less than 10 minutes, with or without instructions.
The Bad
The screw mesh strips out sometimes, resulting in the product sticking to the heated plates. It can press a maximum of 4 grams of weed.
Its however bulky and hard to store away.
PROS
CONS
3. The Dab Press Rosin Press
The Dab Press does exactly what it says on the tin! Presses weed in the fastest and easiest way there is.
Features
- 3 x 7 inch heated plates
- 2 600 watt heating rods
- Shows an accurate temperature
- Weighs almost 17 lbs
The Good
The heat control is really accurate and the plates heat up to the required temperature really fast. It comes with instructions that are easy to read.
The Bad
Does Not work on a A or H frame press and doesn’t come with free gifts or a starter kit. Plates sometimes hit the acorn nut preventing it from closing completely flat which can be a pain.
PROS
CONS
4. The 10 Ton Hydraulic Cylinder Heat Press
This is definitely a more hardcore and serious rosin press. It will provide you with some serious pressure.
Features
- Weighs 34.6 lbs
- 500 watts
- 3 x 5 inch heated platens
- ¼ inch female coupler in the hydraulic cylinder
The Good
The plates are really easy to clean and if there are issues the Dab Press customer services are really helpful and fast to respond to queries.
The Bad
It is a little bit too powerful for small amounts of weed. Hard to assemble and set up and heavy to move around.
PROS
CONS
5. The Dulytek Retrofit Heat Plate Press
Lightweight and portable yet heavy duty and capable of some serious pressing, win - win!
Features
- 4000 lb press pressure
- 110v voltage
- 700 watt power
- Weighs 12.8 lbs
- 0-999 second timer
- Reaches a maximum temperature of 232 degrees celcius
The Good
Can be used mounted or unmounted, regardless of how you use it the controllers aren’t complicated to use. I especially like that it has a dual temp feature and heats up really quickly.
The Bad
You must make sure the plates are flat for it to work well and it sometimes moves about if you are using the maximum press force. For anyone new to rosin presses this one is fiddly to put together.
PROS
CONS
Final Verdict
The Dulytek Retrofit is the most appropriate for pressing Rosin making it today's winner. It is easy to store away when it isn’t in use, simple for beginners to operate and professional enough to produce high quality dab.
Get to know what heat and pressure settings work best for you and enjoy.